Difference between revisions of "Abaqus Guide"

From Storrs HPC Wiki
Jump to: navigation, search
Line 5: Line 5:
  
  
The Abaqus FEA 6.11 (Simulia, Providence, RI) has been installed and configured on the new School of Engineering HPC (code name: Hornet) recently.  
+
The Abaqus FEA 6.12 (Simulia, Providence, RI) has been installed and configured on the new School of Engineering HPC (code name: Hornet) recently.  
 
To use Abaqus on Hornet you will need first load the Abaqus module using this command:   
 
To use Abaqus on Hornet you will need first load the Abaqus module using this command:   
 
   '''module load abaqus/6.12'''
 
   '''module load abaqus/6.12'''

Revision as of 13:13, 28 November 2012

Getting Started with Abaqus on HORNET

Written by Kewei Li

Jan 12, 2012


The Abaqus FEA 6.12 (Simulia, Providence, RI) has been installed and configured on the new School of Engineering HPC (code name: Hornet) recently. To use Abaqus on Hornet you will need first load the Abaqus module using this command:

 module load abaqus/6.12

Then, load FORTRAN compiler if you intend to use subroutine with your simulation:

 module load intelics/2012.0.032

To submit a job to Abaqus through LSF, run this command:

  Abq6122 job=job-1 user=code.f cpus=2 que=standard:fslocal

where “Abq6122” is the command to use Abaqus FEA 6.11, “job-1” is the file name of your input file (job-1.inp), “code.f” is the file name of the user subroutine, “cpus=2” will request two CPUs to run current job and “que=normal:fslocal” will allow Abaqus to run the simulation in a local file system. The simulation will most likely run on another compute node. The simulation result files will be copied back upon completion. To use shared file system, set que=normal:fsshared.

Note: At this time, the Abaqus script written in C++ has not been tested.

If you have any questions or problems, please create a ticket at https://ets.engr.uconn.edu/helpdesk/support/createticket